Apple Users
Related: About this forumI have a Macbook pro
Purchased in 2016. It seems to be acting up a bit. Screen goes black. I tilt it and screen comes back on. Any thoughts.
spooky3
(36,321 posts)After 5 minutes, for example, if not plugged in.
It is most always plugged in and this just started a day or two back.
spooky3
(36,321 posts)CloudWatcher
(1,929 posts)The sleep settings can be such that ... even when it is plugged in .. it will blank the display.
Check your settings in System Preferences / Energy Saver (or Battery) panel and review the "Turn off Display" settings.
Also check your "hot corner" settings. The four corners can be set to sleep or turn off the display. These settings are under "Hot Corners..." in the "Screen Saver" section of the "Desktop & Screen Saver" panel in System Preferences.
Tetrachloride
(8,478 posts)Screen saver
Energy Saver
settings could use slight modification as a test. Settings can get lost, so the small test is a start
Jirel
(2,259 posts)Reset PRAM and SMC. You may have something acting up in how power is being controlled for sleep/wake, assuming its not just a purely physical issue thats sending the wrong signal.
Auggie
(31,844 posts)I nearly always find the same issues.
Meadowoak
(6,265 posts)That wears out prematurely and that somehow causes the screen to go out and come on. I dunno.
usonian
(14,298 posts)Problem:
I have a 2016 macbook touchbar 13" and one month after the 1 year warranty I noticed this "stage lights" issue. 5 months later the issue is worse now.
Yesterday, I noticed that when I tilt the screen back beyond the 90 degree angle the screen goes black. Then if I move it back to 90 degrees it gets illuminated. But the angles vary a lot. Sometimes it gets illuminated only If I move it back to 60 degrees and sometimes a little more than 90 degrees.
Answer:
Apple appears to have a run of displays failing in the new 2016/17 models!
Sadly, the cable between the backlight within the display and the connection to the logic board is the issue here. The flexing of the display (opening & closing the lid) fatigues the wires within the ribbon cable. The complete lid needs to be swapped out.
If a fix is not in order, a wild suggestion (I've done this) is to use an external display and keyboard/mouse and call it a mac mini. Definitely not portable, but you can get a large monitor for cheap (a la thrift store). Feel free to ignore this suggestion.